|
|
|
|
Limited Warranty PolicyINTERIOR Our Interior French door is guaranteed to be free of defects in material and workmanship for a period of five (5) years from the date of purchase when installed properly. For the warranty to be valid, the following instructions have to be observed. 1) Doors have to be handled carefully. They must be stored in a dry place away from sources of heat. 2) Doors should be delivered to building site only after plaster, texture or cement is completely dry, and if to be stored at building site for longer than one week the entire door including top and bottom edges must be sealed with an adequate resin or pigment base sealer of the equivalent. 3) Structural strength or utility doors must not be impaired in fitting of the door or by application of hardware. 4) To prevent excessive moisture absorption, the entire door including all edges must receive at least two coats of paint, varnish or the other properly applied sealer, which is in conformity to minimum commercial standards, immediately after fitting, bevelling and cutting for latches, hinges, weather-stripping, thresholds or other hardware. 5) Before finishing, door surfaces must be clean and dry, with a moisture content no higher that locally prevailing. Any marks, bruises, dust, stamps or labels must be removed by sanding before application of sealer or finish. 6) Warping is considered a manufacturing defect if the warp exceeds 1/4". 7) Caution: Tempered glass scratches easily. We recommend a plastic scrapper knife not tools made of metal, such as razor blades to clean glass. NOT COVERED BY THE GUARNTEE
MID-SOUTH MILLWORK WILL REPLACE ANY DEFECTIVE DOOR IF THE PRECEDING CONDITIONS WERE FOLLOWED. MID-SOUTH MILLWORK MAXIMUM LIABILITY TO THE PURCHASE PRICE OF THE DOOR |
|
|